Mercedes Alu-Saugrohr A6011400901 für OM601 Saugdiesel W124 200D und W201 190D

OM601 intake manifold A6011400901 – buying guide W124 200D & W201 190D

Short answer: A cracked flange, broken-off mounting lugs or a damaged sealing surface on the OM601's aluminum intake manifold cannot be repaired permanently. The solution is a used genuine intake manifold with the part number A6011400901 (casting number R6011410401 or R6011410601) for 190 D (W201), 200 D (W124) and 200 TD (S124) – at KFZTeile-Thot from 149 €.

Anyone restoring a W124 200 D or a W201 190 D, or overhauling the OM601 cylinder head, will sooner or later come across the intake manifold. Sometimes a mounting lug broke off during removal, sometimes the sealing surface shows corrosion pits, sometimes the part is missing entirely on a donor engine. New parts are hardly available anymore for this engine, so the question is: which used intake manifold fits, and how do you recognize a usable one? This guide helps with buying and installation.

How do you recognize wear or damage?

The OM601 intake manifold is a cast aluminum part with no moving components. It does not wear out in the classic sense, but it can be damaged by installation, corrosion and age.

Finding Meaning
Crack at the flange or at a mounting lug Replace the intake manifold – a crack at the sealing flange cannot be reliably repaired
White, powdery deposits or pitting on the sealing surface Aluminum corrosion; with deep pits the new gasket no longer seals properly
Torn-out or stripped thread Depending on location, repairable with a thread insert, otherwise replace
Oily film, sooty inner walls Common on diesel engines due to crankcase ventilation – clean it, no reason to replace
Blue smoke, oil consumption Usually not the intake manifold but worn valve stem seals – see OM601 smokes blue: replacing valve stem seals
Jerking on overrun Not caused by the intake manifold; the linkage damper is often worn – see Diesel jerks on overrun

Causes

After three to four decades, three things mainly take their toll on cast aluminum. First, installation: if the intake manifold is tightened unevenly or too tightly, the mounting lugs can crack – especially when bolts have seized and are removed by force. Second, corrosion: moisture and road salt attack the aluminum, especially at sealing surfaces that sat under an old gasket for a long time. Third, storage damage on donor engines: vehicles that stood disassembled for years often have open intake ports in which dirt and water collect.

What to look for when buying

  1. Compare the part number: Check the part number A6011400901 or the cast-in casting number on your removed part. Our units carry the casting number R6011410401 or R6011410601.
  2. Clarify the engine variant: According to the product data, the intake manifold is intended for the naturally aspirated OM601 diesel in 190 D (W201), 200 D (W124) and 200 TD (S124). For other vehicles, compare the part number beforehand.
  3. Check the sealing surfaces: The flange surface facing the cylinder head should be flat and free of deep corrosion pits. A straightedge laid across the surface reveals gross warping.
  4. Inspect mounting lugs and threads: All lugs complete, no hairline cracks, threads undamaged.
  5. Fit with surrounding components: Compare the connections on the intake manifold with your old part before you transfer hoses and ancillary parts. Order a new flange gasket at the same time.

Solution

If the existing intake manifold is damaged, a used genuine part is the economical solution. We currently have two listings with the part number A6011400901 in stock: with casting number R6011410401 (2 pcs) and with casting number R6011410601 (1 pc), each at 149 €. These are used genuine parts made of cast aluminum; the condition is honestly described in each listing, and you receive exactly the part pictured. Before installation, thoroughly clean the sealing surface on the cylinder head, use a new gasket and tighten the fasteners evenly in a crisscross pattern.

Mercedes intake manifold A6011400901 casting number R6011410401 for naturally aspirated OM601 diesel

Intake manifold OM601 · casting number R6011410401

Part number A6011400901 · casting number R6011410401 · 2 in stock

149,00 €

View product
Mercedes intake manifold A6011400901 casting number R6011410601 for naturally aspirated OM601 diesel

Intake manifold OM601 · casting number R6011410601

Part number A6011400901 · casting number R6011410601 · 1 in stock

149,00 €

View product
Aluminum intake manifold A6011400901 for Mercedes OM601 190D and 200D

Genuine intake manifold OM601 – A6011400901

190 D (W201) · 200 D (W124) · 200 TD (S124) · used, cast aluminum · 149 €

View intake manifold

You can find more parts for your car in our categories W124 and W201.

Compatible vehicles

Model series Model / engine
W201 190 D – naturally aspirated OM601 diesel
W124 200 D – naturally aspirated OM601 diesel
S124 200 TD – naturally aspirated OM601 diesel

Information according to product data. For other vehicles with OM601, please compare the part number on your intake manifold before buying.

FAQ

What is the part number of the OM601 intake manifold?

Our intake manifolds for the naturally aspirated OM601 diesel carry the part number A6011400901. The casting itself also bears a casting number, on our units R6011410401 or R6011410601.

What is the difference between R6011410401 and R6011410601?

Both are casting numbers cast into the aluminum part. Our two listings are assigned to the same part number A6011400901. The part number is what counts for fit; if in doubt, also compare the flange and connections with your removed part.

Does the intake manifold fit the W124 200D and the W201 190D?

According to the product data, the intake manifold A6011400901 is intended for the 190 D (W201), the 200 D (W124) and the 200 TD (S124) with the naturally aspirated OM601 diesel. For other engine variants, please check the part number on your vehicle beforehand.

Should I replace the gasket during installation?

Yes. The flange gasket to the cylinder head is a single-use part. After removal it is compressed and hardened, and reusing it easily leads to leaks.

What does a used genuine intake manifold cost at KFZTeile-Thot?

Both listings currently cost 149 € each. These are used genuine parts whose condition is described in the respective listing.

KFZTeile-Thot is a specialist business for tested and refurbished Mercedes parts with its own test benches and has over 1,000 positive eBay reviews. Not sure whether the intake manifold fits your vehicle? Call us at +49 179 8991069 (Mon–Fri 8 am–6 pm) or write to us via the contact form – ideally with your VIN or a photo of the casting number.

Back to blog

Need help?