Mercedes Lenkschloss A 126 462 07 30 mit Schlüssel für W123 W126 Automatik

W123/W126 Automatic Steering Lock A1264620730 – Ignition Lock

Short answer: If the key sticks, the steering wheel will not unlock, or the lock cylinder sits loose, the steering lock is often worn on W123 and W126 gasoline models with automatic transmission. For the older design with cable connection, the steering lock fits A 126 462 07 30 (also A 126 462 05 30, casting mark 0160). Solution: replace it with a tested genuine part with key – 219,00 €.

If you are looking for a new ignition lock for a Mercedes W123 or W126 with automatic transmission, you quickly run into several part numbers that look almost identical. The problem: gasoline and diesel, older and newer designs, and automatic and manual transmissions use different steering locks. This guide shows which symptoms point to a worn steering lock, how to check before buying whether the older version A 126 462 07 30 with cable connection belongs to your car, and how to avoid mix-ups.

Symptoms

Symptom Likely cause
Key only turns when you jiggle the steering wheel Worn tumblers or a stiff steering wheel lock in the steering lock
Key cannot be removed in position 0 Cable lock to the automatic transmission out of adjustment or locking mechanism in the lock worn
Lock cylinder sits loose or wobbles Worn-out seat in the steering lock housing
Key turns freely, starter does not respond Driver to the ignition starter switch broken – see Guide: Key turns freely on the W123/W126 gasoline model
Key turns cleanly, but ignition or starter does not work Not to be confused with: more likely the ignition starter switch, fuse or starter relay – not the steering lock

Causes

The steering lock of a W123 or W126 has been exposed to daily stress for over 35 years. The brass tumblers in the lock cylinder wear with every locking operation, and so does the key bit itself. A worn key additionally accelerates wear in the cylinder. On top of that comes gummed-up old grease: the steering wheel lock then moves only with difficulty and jams as soon as the steering wheel is under tension.

On cars with automatic transmission, the cable connection is added. It ensures that the key can only be removed in park position. If this area is worn or the cable is incorrectly adjusted, the key can no longer be removed or the lock does not work reliably. Heavy key rings on the ignition key put additional strain on the cylinder.

Testing it yourself

  1. Test the spare key: If a rarely used spare key works perfectly, the problem often lies with the worn main key and not with the lock.
  2. Relieve the steering wheel: Move the steering wheel slightly back and forth while turning the key. If the lock then releases, the steering wheel lock is stiff.
  3. Check the selector lever: Is the selector lever securely in P? If the key still cannot be removed, the cable and the cable connection at the lock should be checked.
  4. Check cylinder play: If the cylinder wobbles noticeably in the housing, the steering lock is worn out.
  5. Read the part number from the old part: After removal, compare the part number or casting mark on the housing with the replacement part (here: A 126 462 07 30 / A 126 462 05 30, casting mark 0160).

Solution

If the cylinder is worn out or the lock jams, replacing the complete steering lock is the cleanest solution. We offer the original steering lock A 126 462 07 30 (also listed as A 126 462 05 30) of the older design: with cable connection for automatic transmission, fits gasoline models of the W123 and W126/C126 series, including key. It is a used, tested genuine part priced at 219,00 €.

Important to avoid confusion: for diesel there is a separate version, which we describe in the guide to the W123/W126 diesel ignition lock The number A 123 462 07 30 mentioned in the gasoline guide is a different part. Therefore always compare the number on your old part.

The steering lock is a one-off piece. If it is sold, you will find more locks in our category Locks & door handles as well as matching parts under W123 and W126.

Mercedes steering lock ignition lock A 126 462 07 30 with key for W123 W126 automatic

Steering lock W123 / W126 automatic with key

Part number: A 126 462 07 30 / A 126 462 05 30 · casting mark 0160

Tested genuine part · 219,00 €

To the steering lock

Compatible vehicles

Model series Note
W123 (e.g. 230 TE) Gasoline models with automatic transmission, older design with cable connection
W126 / C126 (e.g. 280 SE) Gasoline models with automatic transmission, older design with cable connection

For diesel, manual transmission or later designs, please check the part number on your old part beforehand or contact us.

FAQ

How do I know whether my W123 or W126 needs the steering lock A 126 462 07 30?

What matters is the part number or casting mark on the removed lock. The part offered is the older design with casting mark 0160 and cable connection for automatic transmission on gasoline models of the W123 and W126/C126 series. Compare your old part before ordering.

Does the steering lock also fit a W123 with manual transmission?

The part is designed explicitly for cars with automatic transmission, as it has the cable connection. For manual transmission or differing part numbers, please ask us beforehand with your VIN (chassis number) or the number of your old part.

Does this ignition lock fit a W123 or W126 diesel?

No, the steering lock offered is described for gasoline models. For diesel cars there is a separate version, which we cover in a separate guide.

Is a key included?

Yes, the steering lock is delivered with a key. Your other locks (doors, trunk) will then generally no longer be keyed alike unless they are adapted.

How much does the tested steering lock A 126 462 07 30 cost?

The tested used genuine part costs 219,00 euros. It is a one-off piece; if it is sold, you will find more locks in our category Locks & door handles.

KFZTeile-Thot is a specialist business for tested and refurbished Mercedes parts with its own test benches. Over 1.000 positive eBay reviews show that our customers appreciate the honest condition description. Not sure whether the steering lock fits your car? Call us at +49 179 8991069 (Mon–Fri 8 am–6 pm) or write to us via the contact form.

Back to blog

Need help?