Mercedes Kettenspanner Steuerkette A1150500911 NOS für M115

M115 Chain Tensioner A1150500911: Timing Chain Rattling (W115/W123)

Short answer: If the timing chain of your Mercedes with the M115 four-cylinder (/8 W115, W123) rattles after a cold start, the chain tensioner is often worn or leaking. The matching tensioner has the part number A 115 050 09 11. We have it as an unused NOS genuine part in the original box for 179,00 € in stock.

If you drive a /8 or W123 with the M115 four-cylinder, you know the question: is the brief rattle after starting still normal, or is it already a case for the timing chain? A new genuine chain tensioner for this engine is hard to find today, and aftermarket parts differ considerably in quality and fit. This guide shows how to recognize a worn tensioner, what you can check yourself and what matters when buying.

Symptoms

Symptom Likely cause
Rattle from the timing drive in the first seconds after a cold start, then quiet Chain tensioner builds up pressure too slowly (internal leak, wear on the pressure pin)
Rattle remains audible even with a warm engine and at idle Stretched timing chain, worn guide rails or tensioner at the end of its travel
Oil traces on the tensioner housing or at the screw connection Leaking tensioner or aged gasket
Metallic rattling more from the lower engine area, not from the timing cover Another cause is possible, such as the oil pump drive – see Oil pump chain rattles: check & replace

Causes

The chain tensioner keeps the timing chain under tension between the crankshaft and camshaft and dampens its vibrations. It works with spring force and is assisted by the engine oil. After decades of operation, the pressure pin and guide wear down, deposits from old oil build up and the internal damping decreases. If a car stands for a long time or the oil was rarely changed, the tensioner drains after shutdown and takes longer after starting to carry the load again. At the same time, the chain stretches with mileage, so the tensioner has to extend further and further. At some point its travel is no longer sufficient.

Testing it yourself

  1. Check oil level and oil condition: Too little or heavily aged oil amplifies the cold-start rattle. This is the cheapest check and belongs at the start.
  2. Narrow down the noise: Listen closely at the timing cover (at the front of the engine) during a cold start. Rattling that disappears after a few seconds points to the tensioner; constant rattling points more to the chain or guide rails.
  3. Visual inspection of the tensioner: Check the housing and screw connection for oil leaks.
  4. Read off the part number: Check the number on the removed tensioner or have it determined via the VIN (chassis number) before you order a replacement.
  5. Have chain stretch measured: During removal, the chain and guide rails should be checked as well. A new tensioner does not permanently compensate for a heavily stretched chain.

Solution

If the tensioner is confirmed as the cause, replace it with a genuine part with the correct part number. We have the Mercedes chain tensioner A 115 050 09 11 as an NOS part in stock: unused in the original box from old warehouse stock, pressure pin bright and free of pitting. Price: 179,00 €. It is a one-off piece. You will find more parts for this model series in our W123 collection.

Mercedes chain tensioner timing chain A1150500911 NOS for M115 in the original box

NOS · Genuine Mercedes-Benz

Chain tensioner timing chain M115

Part number: A 115 050 09 11

179,00 €

View product

Compatible vehicles

Model series Engine / model Note
W115 (/8) M115 – 200, 220, 230 (four-cylinder) per product title
W123 M115 (four-cylinder) per product data
G-Class M115 per product description
T1 (van) M115 per product description

The information refers to vehicles with the M115 four-cylinder. Other engines of the same model series (such as M102 or six-cylinder) use different tensioners. Compare the part number before buying; if in doubt, we are happy to help.

Related to engine restoration: our Crankshaft buying guide OM616/OM615 for W123 and W115.

FAQ

How do I know that the chain tensioner on the M115 is worn?

Typical is a brief rattle or clatter from the area of the timing chain right after a cold start, which gets quieter after a few seconds. If the noise persists when warm, the chain, guide rails and tensioner should be checked together.

What is the part number of the chain tensioner for the M115?

The tensioner offered here carries the Mercedes part number A 115 050 09 11 (also written as 1150500911 or 115 050 09 11).

Does the chain tensioner A1150500911 fit a W123 230 E?

According to our product data, the tensioner is intended for the M115 four-cylinder. The 230 E has a different engine; please compare the part number on your installed tensioner or via the VIN (chassis number) before buying.

Is the part new or used?

It is a NOS part: unused, in the original box from old warehouse stock, the pressure pin is bright and free of pitting.

Should I replace only the chain tensioner?

A new tensioner does not permanently compensate for a heavily stretched chain or worn guide rails. When replacing it, therefore also check chain stretch and guide rails, and replace worn parts in the same operation.

KFZTeile-Thot is a specialist business for tested and refurbished Mercedes parts with its own test benches and has over 1,000 positive eBay reviews. Not sure whether the tensioner fits your car? Call us at +49 179 8991069 (Mon–Fri 8 am–6 pm) or write to us via the contact form.

Back to blog

Need help?