Original Bosch Leerlaufsteller A0001412225 für Mercedes W124 und W201

W124/W201 Idle Speed Hunting? Idle Speed Actuator A0001412225

Short answer: If the idle of your W124 or W201 surges, the speed is too high with a warm engine or the engine stalls at standstill, the idle speed actuator is often sluggish or electrically defective. The genuine Bosch idle speed actuator with part number A0001412225 (A 000 141 22 25) is tested and functional with us for 49,00 € in stock. Before replacing it, it is worth checking for false air, contamination and the number of your installed actuator.

“W124 idle fluctuates”, “190 idle speed too high at standstill”, “engine stalls at the traffic light” – on the Mercedes W124 and W201 model series, these searches strikingly often lead to the same component: the idle speed actuator. It is an electrically controlled air valve that deliberately routes air past the closed throttle valve and thus keeps the idle speed stable – with a cold engine, with lights, blower or A/C switched on. In this guide we show how to narrow down the fault, which checks you can do yourself and what to look for with part number A0001412225.

Symptoms

Symptom Likely cause
Idle surges or oscillates up and down evenly Idle speed actuator sticking due to deposits
Idle speed clearly too high with a warm engine Actuator stuck open or air leak in the intake tract
Engine stalls at standstill, especially with lights, blower or A/C on Actuator no longer opens sufficiently or has failed electrically
Speed drops only slowly to idle when coasting Actuator reacts with delay, air passage contaminated
Idle unsteady, in addition gauges flicker or the speedometer fails Another cause: overvoltage protection relay – see Guide: check the 7-pin OVP relay
W124: idle fluctuates and the cruise control does not work Other cause: control by the control unit – see Guide T/LLR control unit W124

Causes

The idle speed actuator sits in the intake tract and has intake air flowing through it constantly. With it, oil vapor from the crankcase ventilation and fine dirt get into the air passage. Over decades, this forms a sticky coating on the movable rotary valve. The actuator becomes sluggish, reacts with delay to the control, and the idle speed begins to oscillate. If a vehicle has stood for a long time, the valve can also seize completely.

Added to this is the aging of the electrics. Winding and connector have been exposed to engine heat, moisture and vibration for decades; contacts corrode, the winding can break. An electrically failed actuator stays stuck in one position – idle is then permanently too high or drops under load. Brittle hoses and seals around the actuator additionally cause false air and amplify the symptoms.

Testing it yourself

  1. Visual check for air leaks: Check the hoses on the idle speed actuator and in the intake tract for cracks, porosity and loose clamps. This costs nothing and rules out a common cause.
  2. Check the connector: With the ignition off, pull the connector off the actuator and check the contacts for corrosion, verdigris and a firm fit.
  3. Feel the function: With the engine running, place your hand on the actuator housing. A working actuator is noticeably active. If you feel nothing, an electrical fault or a stuck slide is likely.
  4. Clean: With the actuator removed, deposits in the air passage can be dissolved with throttle body cleaner. If the idle speed is smoother afterwards, contamination was the cause.
  5. Compare the part number and replace: If the symptom persists, note the number on your installed actuator and replace it with a suitable genuine part. If the fault cannot be narrowed down this way, the basic setting of the injection system should be checked by a specialist.

Solution

If the idle speed actuator is electrically defective or still sluggish despite cleaning, replacing it with a genuine part is the clean solution. We offer the genuine Bosch idle speed actuator with the Mercedes part number A 000 141 22 25 (A0001412225) for Mercedes W201 and W124 – at a price of 49,00 €. These are used genuine parts that have been tested and work; small scratches and signs of use can be seen in the product photos. We currently have several units in stock.

Important: Depending on engine and model year, Mercedes fitted different idle speed actuators. Therefore compare the number on your actuator with A 000 141 22 25 before you order. If you drive a 190 E 2.3 with the actuator in the bracket A 102 141 02 82, you will find the details in the Guide idle speed actuator M102 in the W201; for V8 models in the W126 and R107 there are separate actuators, described in the Idle speed actuator guide W126/R107. You can find more injection components in the category Fuel system & injection.

Genuine Bosch Idle Speed Actuator A0001412225 for Mercedes W124 and W201

Idle speed actuator Bosch – W201 / W124

Part number: A0001412225

Used, tested, works

49,00 €

View product
Idle speed actuator A 000 141 22 25 by Bosch – additional view

Compare the part number before buying

Depending on engine and model year, different actuators are fitted. Compare your part with the photos or send us your chassis number.

Request a fit check
Bosch Idle Speed Actuator A0001412225 Mercedes W124 W201 – ready to ship

Idle speed actuator A0001412225 – ready to ship

Genuine Bosch for Mercedes W201 and W124 · 49,00 €

View now

Compatible vehicles

Part number Model series Stated according to product data
A0001412225 (A 000 141 22 25) W201 Mercedes 190 series (W201)
A0001412225 (A 000 141 22 25) W124 Mercedes E-Class (W124)

We deliberately do not state an assignment to individual engines and model years here, because it cannot be reliably substantiated from our product data. What matters is the number on your installed actuator. If you are unsure, tell us your VIN (chassis number) and model year – we check the fit free of charge before purchase. You will find more parts in the categories W124 and W201.

FAQ

How do I recognize a defective idle speed actuator on the W124 or W201?

Typical are a surging or fluctuating idle, an idle speed that is too high with a warm engine, and an engine that stalls at standstill as soon as consumers are switched on. This is often noticeable at the traffic light or when coasting.

What part number does the Bosch idle speed actuator for W201 and W124 have?

The genuine Bosch idle speed actuator offered here carries the Mercedes part number A 000 141 22 25 (A0001412225).

Does the idle speed actuator A0001412225 fit every W124 or W201?

Not automatically. Depending on engine and model year, Mercedes fitted different idle speed actuators. Compare the number on your installed actuator with A 000 141 22 25 or send us your chassis number and model year, and we will check the fit free of charge.

Can I clean a sluggish idle speed actuator instead of replacing it?

Yes, if the actuator is merely dirty. Deposits in the air passage can be dissolved with throttle body cleaner. If the actuator is electrically defective or remains sluggish after cleaning, only replacement helps.

Has the idle speed actuator on offer been tested?

Yes. These are used genuine Bosch idle speed actuators that have been tested and work. They show small scratches and signs of use, which can be seen in the product photos.

KFZTeile-Thot is a specialist business for tested and refurbished Mercedes parts with its own test benches. Over 1,000 positive eBay reviews show that our customers can rely on the honest description of the parts. Do you have questions about fit or the symptoms? Call us at +49 179 8991069 (Mon–Fri 8 am–6 pm) or write to us via the contact form.

Back to blog

Need help?