W202 Automatic Steering Lock 2022670164 – Ignition Lock Sticking
Share
"Key won't turn," "key won't come out," "steering wheel lock is stuck" – these are the search terms that bring many C-Class W202 drivers with automatic to us. The steering lock sits on the steering column, holds the lock cylinder, carries the ignition switch and is connected to the shift lever lock by a cable. On the automatic W202, this means steering wheel lock, ignition and shift lever are mechanically linked. In this guide we show how to recognize a defect, what you can check yourself beforehand and what to look for in a replacement part.
Symptoms
| Symptom | Likely cause |
|---|---|
| Key is hard to turn or won't turn at all | Worn lock cylinder or steering lock, steering wheel lock under tension |
| Key cannot be removed in position P | Cable to the shift lever lock out of adjustment, stiff, or mechanism in the steering lock defective |
| Ignition or starter cut out depending on key position | Ignition switch on the steering lock worn |
| Steering wheel no longer locks or key turns without resistance | Mechanism in the steering lock broken or worn out |
| Ignition key works, but the trunk does not open | Different cause: Trunk lock – see W202/W210 trunk won't open |
Causes
A W202 today usually has 25 years or more behind it. In the steering lock, locking pins, springs and the lock cylinder's wafers work with every start. Wear debris, gummed-up grease and dirt build up, the wafers wear in, and the key itself wears down as well. On the automatic car, the cable to the shift lever lock comes into play: it ensures that key and shift lever lock in coordination with each other. If the cable becomes stiff or goes out of adjustment, it often shows up as "key won't come out," even though the lock itself may still be fine. The ignition switch on the steering lock wears at its contacts, which can lead to dropouts in individual key positions.
Testing it yourself
- Test the spare key: If it works noticeably better, the worn key is more likely the cause than the lock.
- Relieve the steering wheel: Gently move the steering wheel back and forth while turning the key. If the lock then releases, only the steering wheel lock was under tension.
- Check the shift lever: Is the shift lever sitting properly in P? With the brake pressed, move it out of P and back in once, then try again to remove the key.
- Check the cable: Check the cable to the shift lever lock for kinks, damage and smooth operation.
- Go through the key positions: If ignition or starter only cut out in certain positions, that points to the ignition switch or the steering lock.
Solution
If the steering lock is worn or mechanically defective, replacing it with a genuine part is the clean solution. We have the steering lock with ignition switch and cable 202 267 01 64 (A2022670164) in stock for the C-Class W202 sedan with automatic transmission – a used, tested genuine part, removed from a W202 diesel, for 189,00 €. Before ordering, compare the part number with your old part. A used steering lock usually has a different key code than your other locks; please see the product page for the scope of delivery. For older model series with automatic we have a separate guide: W123/W126 Automatic Steering Lock A1264620730 – the part described there does not fit the W202.
Steering lock W202 automatic
Part number: 202 267 01 64 (A2022670164)
Price: 189,00 € · One-off piece
View productAlready sold? You will find more parts under Locks & door handles.
Compatible vehicles
| Model series | Models according to product data | Note |
|---|---|---|
| Mercedes C-Class W202 sedan | C 200 D, C 220 D, C 250 D, C 280 | automatic transmission only; part comes from a W202 diesel |
We have no documentation for other body styles, manual transmissions or other engines. What matters is the part number 202 267 01 64 on your old part – if in doubt, ask us before buying.
FAQ
How do I recognize a defective steering lock on the W202?
Typical signs are a key that is hard to turn, a steering wheel that no longer locks cleanly, and dropouts of ignition or starter in individual key positions.
Why can't I remove the key on the W202 automatic?
On the automatic car, the steering lock is connected to the shift lever lock by a cable. If the shift lever is not sitting properly in P or the cable is stiff, the key stays stuck.
What is the part number of the steering lock for the W202 with automatic?
The steering lock with ignition switch and cable that we offer carries the part number 202 267 01 64 (A2022670164).
Does the steering lock also fit a W202 with manual transmission?
We have no documentation for that. The part is specified for the W202 sedan with automatic transmission; please compare the part number with your old part.
How much does the steering lock 202 267 01 64 cost?
The used, tested genuine part costs 189,00 € from us. It is a one-off piece.
KFZTeile-Thot is a specialist business for tested and refurbished Mercedes parts with its own test benches and has over 1.000 positive eBay reviews. Not sure whether the steering lock fits your W202? Call us at +49 179 8991069 (Mon–Fri 8 am–6 pm) or write to us via the contact form – ideally with your chassis number and the part number of your old part. Our guide covers more steering and ignition locks: W124/W201 ignition lock defective?.